Introduce
We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.
We provided development kit include :
1, All chip's datasheet
2, Arduino driver and sample code
3, Application notes for Arduino UNO and Arduino Mega2560
4, Source code for STM32
5, Schematic
Features
Ø Drive 2.0-inch TFT screen LCD-2000
Ø Display resolution: 176(H)×220(V)
Ø Display data RAM : 176×220 ×18bits=696960bits
Ø Display mode: Full color mode, 262K-colors, 8-colors
Ø Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin
Ø Supports 8-bit micro-controller interface 8080 series
Ø IO port power supply voltage:1.65-3.5V
Ø Low power consumption
Where can I get detailed information about the signals and pin numbers on the connector to use as part of my 8051-oriented computer? Attempts to find the datasheet were unsuccessful. Thanks.
回复删除