MassDuino product

What's MassDuino


Massduino is a new product line, which combines the Arduino platform peripheral -rich, convenient and quick development, low-cost and easy to manufacture large-scale production advantages. Almost all of the Arduino code can be applied to MassDuino without modification, users do not need to learn any new knowledge, you can immediately begin using MassDuino to product development. MassDuino use a special custom MCU MD-8088, this chip has a very unique and new design, ensuring high operating efficiency while providing a low cost of applications. INHAOS upcoming a series of application modules which is based MassDuino. The application modules can be developed in the Arduino environment , and then direct used to commercial products, creative implementation and production time reduced to a minimum.


MD-8088 specification

32 8-bit general-purpose working registers
Performance when working in 32MHz up to 32MIPS
Single-cycle hardware multiplier(8×8)
Can be edited in the Arduino environment, concise and easy to use
504 bytes of data FLASH, support byte read (simulate E2PROM)
1K bytes SRAM on-chip
131 instructions, 80% instruction execution time for a single clock cycle
Programmable synchronous / asynchronous USART
Can work in master / slave mode SPI Serial Interface
Support the expansion of the chip in-circuit debugging functions
8K bytes of in-system programmable FLASH, innovative data encryption technology
By SWD interface programming for FLASH, EEPROM, system configuration area , the ISP functio
Up to 30 programmable I / O
High-performance, low -power and low-cost
I2C -compatible two-wire serial communication interface protocols , supporting master and slave device mode

LCD Development Kit 3916 with Mega 2560 2.0" TFT LCD Display TFT LCD PCB Adapter

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include:

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM: 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage: 1.65-3.5V

Ø  Low power consumption

 

LCD PCB Adapter for MEGA 2560

The TFT LCD PCB Adapter for mega 2560 is compatible with Arduino pins, user can directly plug the TFT LCD PCB Adapter in the shield and stand on the Arduino board.

Package list

1PCS 2.0" TFT LCD Module

1PCS LCD PCB Adapter

   

 

Massduino LITE R4

Instruction:

Massduino is a new product line, which combines the Arduino platform peripheral -rich, convenient and quick development, low-cost and easy to manufacture large-scale production

 advantages. Almost all of the Arduino code can be applied to MassDuino without modification, users do not need to learn any new knowledge, you can immediately begin

 using MassDuino to product development.MassDuino use a special custom MCU MD-8088, this chip has a very unique and new design, ensuring high operating efficiency while

 providing a low cost of applications.INHAOS upcoming a series of application modules which is based MassDuino. The application modules can be developed in the Arduino

 environment , and then direct used to commercial products, creative implementation and production time reduced to a minimum.

For more information about Arduino and Massduino,you can visit our INHAOS website.

 

LCD-2000-3916,7775,9225

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include :

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM : 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage:1.65-3.5V

Ø  Low power consumption

  

LCD Development Kit 7775 with Mega 2560 2.0" TFT LCD Display TFT LCD PCB Adapter

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include:

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM: 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage: 1.65-3.5V

Ø  Low power consumption

 

LCD PCB Adapter for MEGA 2560

The TFT LCD PCB Adapter for mega 2560 is compatible with Arduino pins, user can directly plug the TFT LCD PCB Adapter in the shield and stand on the Arduino board.

Package list:

1PCS 2.0" TFT LCD Module

1PCS LCD PCB Adapter

TFT LCD-2000-3916

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include :

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM : 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage:1.65-3.5V

Ø  Low power consumption

  

LCD-2000-3916,7775,9225

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include :

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM : 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage:1.65-3.5V

Ø  Low power consumption

  

Package list:

2 pcs 3916 TFT LCD Module Display

2 pcs 7775 TFT LCD Module Display

2 pcs 9225 TFT LCD Module Display