MassDuino product

What's MassDuino


Massduino is a new product line, which combines the Arduino platform peripheral -rich, convenient and quick development, low-cost and easy to manufacture large-scale production advantages. Almost all of the Arduino code can be applied to MassDuino without modification, users do not need to learn any new knowledge, you can immediately begin using MassDuino to product development. MassDuino use a special custom MCU MD-8088, this chip has a very unique and new design, ensuring high operating efficiency while providing a low cost of applications. INHAOS upcoming a series of application modules which is based MassDuino. The application modules can be developed in the Arduino environment , and then direct used to commercial products, creative implementation and production time reduced to a minimum.


MD-8088 specification

32 8-bit general-purpose working registers
Performance when working in 32MHz up to 32MIPS
Single-cycle hardware multiplier(8×8)
Can be edited in the Arduino environment, concise and easy to use
504 bytes of data FLASH, support byte read (simulate E2PROM)
1K bytes SRAM on-chip
131 instructions, 80% instruction execution time for a single clock cycle
Programmable synchronous / asynchronous USART
Can work in master / slave mode SPI Serial Interface
Support the expansion of the chip in-circuit debugging functions
8K bytes of in-system programmable FLASH, innovative data encryption technology
By SWD interface programming for FLASH, EEPROM, system configuration area , the ISP functio
Up to 30 programmable I / O
High-performance, low -power and low-cost
I2C -compatible two-wire serial communication interface protocols , supporting master and slave device mode

LCD Development Kit 3916 with Mega 2560 2.0" TFT LCD Display TFT LCD PCB Adapter

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include:

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM: 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage: 1.65-3.5V

Ø  Low power consumption

 

LCD PCB Adapter for MEGA 2560

The TFT LCD PCB Adapter for mega 2560 is compatible with Arduino pins, user can directly plug the TFT LCD PCB Adapter in the shield and stand on the Arduino board.

Package list

1PCS 2.0" TFT LCD Module

1PCS LCD PCB Adapter

   

 

Massduino LITE R4

Instruction:

Massduino is a new product line, which combines the Arduino platform peripheral -rich, convenient and quick development, low-cost and easy to manufacture large-scale production

 advantages. Almost all of the Arduino code can be applied to MassDuino without modification, users do not need to learn any new knowledge, you can immediately begin

 using MassDuino to product development.MassDuino use a special custom MCU MD-8088, this chip has a very unique and new design, ensuring high operating efficiency while

 providing a low cost of applications.INHAOS upcoming a series of application modules which is based MassDuino. The application modules can be developed in the Arduino

 environment , and then direct used to commercial products, creative implementation and production time reduced to a minimum.

For more information about Arduino and Massduino,you can visit our INHAOS website.

 

LCD-2000-3916,7775,9225

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include :

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM : 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage:1.65-3.5V

Ø  Low power consumption

  

LCD Development Kit 7775 with Mega 2560 2.0" TFT LCD Display TFT LCD PCB Adapter

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include:

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM: 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage: 1.65-3.5V

Ø  Low power consumption

 

LCD PCB Adapter for MEGA 2560

The TFT LCD PCB Adapter for mega 2560 is compatible with Arduino pins, user can directly plug the TFT LCD PCB Adapter in the shield and stand on the Arduino board.

Package list:

1PCS 2.0" TFT LCD Module

1PCS LCD PCB Adapter

TFT LCD-2000-3916

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include :

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM : 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage:1.65-3.5V

Ø  Low power consumption

  

LCD-2000-3916,7775,9225

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include :

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM : 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage:1.65-3.5V

Ø  Low power consumption

  

Package list:

2 pcs 3916 TFT LCD Module Display

2 pcs 7775 TFT LCD Module Display

2 pcs 9225 TFT LCD Module Display

     

    

Mega 2560+Mega 2560 adapter+LCD-2000-7775

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include:

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM: 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage: 1.65-3.5V

Ø  Low power consumption

MEGA 2560 R3

■INTRODUCTION

MEGA 2560 R3 is an Arduino compatible board, It’s based on Arduino MEGA 2560 design, So you can use BUONO MEGA 2560 as Arduino MEGA 2560, All Code, shield and IDE for Arduino MEGA 2560 R3 are also valid on BUONO MEGA 2560, Some visible improvement on hardware make BUONO more flexible and easier use,  For example : 3.3V or 5V IO selectable allow you connect some 3.3V modules (such as XBee) to BUONO directly.

■FEATURES

l  Inherits all of Arduino MEGA 2560's features

l  Compatible to Arduino MEGA 2560's pin layout, screw hole and dimensions

l  3.3V or 5V operating voltage selectable

l  More visible location of indication LEDs

l  Evolved with SMD components

l  Digital I/O pins 54(of which 15 provied PWM output)

l  Analog Input pins 16

l  Flash memory 256 KB or which 8KB used by bootloader

l  SRAM 8 KB

l  EEPROM 4KB

l  Clock speed 16MHz

l  Micro USB connection make the cable can be mixed use with most digital products such as cell phone

l  5V DC/DC provide 95% efficiency

l  6V to 23V width rang input

l  Provide max 1.8A for peripheral circuits

l  Ground terminal make measurement easier

■THE DIFFERENCE BETWEEN Arduino MEGA 2560 AND BUONO MEGA 2560

	Arduino MEGA 2560	BUONO MEGA 2560
USB Connector	Type B Female	Micro USB connector
Operating Voltage	5V	3.3V or 5V selectable
3.3V Current	50mA	600mA
5V Current	500mA	1.8A
Input Range	7V to 12V	6V to 23V
MCU	ATMEGA2560	ATMEGA2560
Others		Ground terminal LPF for AVCC

                

LCD PCB Adapter

The TFT LCD PCB Adapter for MEGA 2560 is compatible with Arduino pins, user can directly plug the TFT LCD PCB Adapter in the shield and stand on the Arduino board.

Package list:

1PCS 2.0" TFT LCD Module

1PCS LCD PCB Adapter

1PCS Mega 2560 

1PCS USB cable

4 set screw and nut 

     

LCD PCB Adapter for MEGA 2560+LCD-2000-7775

LCD PCB Adapter for MEGA 2560+LCD-2000-7775

Introduce

We have a total of three electronic screen, they are LCD-2000-3916/LCD-2000-9225/LCD-2000-7775. They are single-chip controller, and all of them can display to a maximum of 176-RGB x 220 -dot graphics on 262k-color TFT panel. The chip can be connected to the outside of the microprocessor directly. And accept the 8-bit high speed bus interface and serial peripheral interface. The display data can be stored in the memory for data RAM which is 176×220×18 bits.

We provided development kit include:

1, All chip's datasheet

2, Arduino driver and sample code

3, Application notes for Arduino UNO and Arduino Mega2560

4, Source code for STM32

5, Schematic

Features

Ø  Drive 2.0-inch TFT screen LCD-2000

Ø  Display resolution: 176(H)×220(V)

Ø  Display data RAM: 176×220 ×18bits=696960bits

Ø  Display mode: Full color mode, 262K-colors, 8-colors

Ø  Pin set: DB0-DB7 is IO port for data transmission, WR/RS/CS/LE/RST/PWM is control pin

Ø  Supports 8-bit micro-controller interface 8080 series

Ø  IO port power supply voltage: 1.65-3.5V

Ø  Low power consumption

 

LCD PCB Adapter for MEGA 2560

The TFT LCD PCB Adapter for mega 2560 is compatible with Arduino pins, user can directly plug the TFT LCD PCB Adapter in the shield and stand on the Arduino board.

Package list:

1PCS 2.0" TFT LCD Module

1PCS LCD PCB Adapter

    

   

Feedback

We are doing our best to ensure items’ quality and our service.

So if you have any problem, please do feel free to contact us before leaving feedback.

We’ll try our best to solve your problem, and improve our service.

Once your item arrives in satisfactory condition, please leave feedback for us. And we will do the same for you.

Payment

We can only accept Paypal by now and thanks for your understanding.

     

Shipping

1.      All items will be shipped to your paypal address. Please update your latest address when you check out, and please make sure to provide us with correct, precise, and detail shipping address.

2.      Most of the items will be shipped via Singapore post.

Note: We will ship your items out via Singapore Post with a tracking number for free if you purchase exceed $30. If not, and you still need a tracking number, please contact us when you place an order. For countries that are a little far away, especially South America, it is suggest that you add a tracking number for your order, in case of losing parcels.

3.      All items will be shipped with 1 working days after payment received and cleared (excluding Sat, Sun & Holiday).

4.      Tax: We’ll do our best to assist you to clear the goods, and the tax depends on each country’s custom.

5.      If you don’t receive items over 30 business days, please feel free to contact with us. We will solve it asap.

6.      Below shipping time for your reference.

(Since it is really busy season now, the post office gets so many packages to deal with every day, your parcel may be delay for a few days, Hope you can understand and be patient.)

  

Return & Refund

We absolutely stand behind our products. We also offer a 14 day money back guarantee should you be unhappy for any reason whatsoever. We will refund the entire cost of the item upon receipt of the returned item, not including the shipping and insurance charges. Our aim is 100% customer satisfaction!